Undead Survival
 -Forums - Reply - Statistics - Sign Up - Search - -
Undead Survival Support Forum / Ideen und Anfragen / Siemens Simcenter Flomaster 2019.3
Author Message
amiana20
Member
# Posted: 10 Apr 2020 06:11
Reply 


[center]Siemens Simcenter Flomaster 2019.3


[img]https://i111.fastpic.ru/big/2020/0407/1b/de72507a257be6b993f43ecdef37cc1b.jpg[/i mg]


Siemens Simcenter Flomaster 2019.3 | 1.5 Gb
[/b][/center]


Mentor, a Siemens business, is pleased to announce the availability of the latest release of the FloMASTER 2019.3 thermo-fluid system modeling product.



Visco-elastic behavior for polymer pipes
Polymer pipes are getting more and more common in different industries. These pipes exhibit a different behaviors during surge events to those made of steel or brass. The pipe wall indeed has a non-linear response to pressure surge: an immediate elastic response is followed by a retarded viscous response. Simcenter Flomaster 2019.3 introduces a new option in the pipe component to account for visco-elastic behavior. In the figure below it can be noted the different behaviors between typical steel pipes in yellow and polymer pipes in green. It can also be appreciated how the results obtained with the new visco-elastic modelling capability are in good agreement with published literature (Covas, S. M. 2004. The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. Part I-experimental analysis and creep characterization. Journal of Hydraulic Research Vol. 42, No. 5, 516-530.)


[center][img]https://i111.fastpic.ru/big/2020/0407/70/87be8e803c578d4e36bae0a8f3dd237 0.jpg[/img][/center]



Non-Newtonian behavior of fluids
Not only ketchup, custard and tooth paste are non-Newtonian fluids but also many industrial fluids are. These are characterized by a viscosity that changes when a force is applied. Simcenter Flomaster 2019.3 introduces a new capability to model non-Newtonian behavior in systems where pipe friction losses dominate. In particular, the pipe component has been extended to model fluids that are dilatant or pseudo-plastic as well as fluids that exhibit Bingham-plastic or Yield-pseudo plastic behavior. Non-Newtonian behavior can be specified either using power law indices or by a curve of Shear Stress Vs Shear Rate and is applicable in steady state and slow transient simulations.

Video Export
Enabling user to quickly and easily understand the behavior of a thermo-fluid system is a priority for the Simcenter Flomaster team. I have already discussed Visual Physics in my last post and this release builds on this to provide a one-click workflow to export a video of the simulation visualization. This can be easily shared within the organisation and allows easier communication and quicker decision making based on valuable information.

Data history tracking
Understanding the history and provenance of data is crucial. With Simcenter Flomaster data is securely stored and tracked inside a relational database. This capability has been enhanced in Simcenter Flomaster 2019.3 and tightly connected to Active Directory. If a user is using active directory for use permissions, the name of the user will be reported for Networks, Result Sets, Performance Data and Scripts. Ultimately this feature makes it easier for a user to understand who created or modified different items.

Tank volume import wizard
Tanks can have very complex shapes, no matter if they are in an aircraft, a chemical plant, on a ship or in a power generation plant. Defining the geometry of these tanks for a system level simulation can be very time consuming. To overcome this problem Simcenter Amesim has created the CAD Import fuel system plugin that automatically extracts all of the information needed for a system level simulation from the CAD geometry of the tank. Simcenter Flomaster 2019.3 introduces a new wizard to the Multi-Arm tank component that reads data files created using the Simcenter Amesim CAD Import fuel system plugin and automatically extract all the required information.

Pump curve dialog and curve digitizer
The Pump Head Curve dialogue introduced in Simcenter Flomaster 2019.2 has been enhanced in response to user feedback. The Curve Digitizer can be accessed directly from the pump curve enabling for a quick creation of the curve.

RSM Based FMU Enhancements
Simcenter Flomaster 2019.2 introduced the capability to export FMU's based on response surface models (RSM), both model exchange and co-sim, that allows maximum speed and flexibility on reuse. In Simcenter Flomaster 2019.3, the exported FMU includes all source files to enable compilation by a third party tool if required. This capability allows for cross platform compliance.


Simcenter Flomaster allows engineers to virtually simulate and optimize fluid flows to ensure efficient performance in gas, liquid, and two-phase systems. Executed early in the development cycle, this can improve your time to market and reduce costs by addressing issues when changes can be most effective.

Our product offers in-built empirical data, a large library of components and sample systems to increase engineering productivity. The steady-state and transient solvers allow for rapid component sizing, pressure, temperature, and flow studies system-wide, and monitoring for system performance issues during real world operating conditions such as pressure surge. As part of a large engineering process, Simcenter Flomaster tightly couples with Simcenter FLOEFD for when more detail is needed for a given component and with other system level tools through Functional Mock-up Interface (FMI) for total system of system analysis.

Simcenter Flomaster CAD2FM Feature

Siemens PLM Software a business unit of the Siemens Digital Factory Division, is a leading global provider of product lifecycle management (PLM) and manufacturing operations management (MOM) software, systems and services with over 15 million licensed seats and more than 140,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with its customers to provide industry software solutions that help companies everywhere achieve a sustainable competitive advantage by making real the innovations that matter.

Product: Siemens Simcenter Flomaster
Version: 2019.3 (9.5.0 Build 130)
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.5 Gb

Supported Platforms

Simcenter Flomaster 2019.3 requirements:

Operating system support:
- Windows 10-x64
Operating systems should include the latest Microsoft published updates.
- Microsoft .NET Framework 4.7.2 or higher is required
- 5 GB available hard drive space for full installation
- Minimum screen resolution of 1280 x 1024 with normal font size selected and scaling set to 100% (this is the same as setting DPI to 96 pixels per inch).
Database server support:
- Microsoft SQL Server 2017
- Microsoft SQL Server 2016 SP1
- Microsoft SQL Server 2014 SP2
- Microsoft SQL Server 2012 SP4
- Oracle Database Server 11g
Note:
- It is not possible to upgrade databases from releases prior to Flomaster V7.9.4 toSimcenter Flomaster 2019.3.For information on how toupgrade from versions prior to V7.9.4 please raise a service request in Support Center

Important Note
Simcenter Flomaster 2020.1 scheduled for release in Q22020 will be the last release to support Simcenter Flomaster Link for Simulink. Future releases of Simcenter Flomaster post Simcenter Flomaster 2020.1 release will not support Simcenter Flomaster Link for Simulink. It is recommended that users of the Simcenter Flomaster Link update their networks to use FMUs via the FMU Export functionality and import the FMUs into Simulink.The FMU export offers the same functionality with the ability to set and read data during the simulation with additional flexibility with the possibility of setting network variables via input parameters

Compatible Releases

The following releases are compatiblewith Simcenter Flomaster 2019.3
- Simcenter FLOEFD 2019.2
- Simcenter MotorSolve 6.2 & 6.3



[center][b]DOWNLOAD LINKS :
[/center]

[code]
https://nitroflare.com/view/39ED950C8A98442/pfbe6.Siemens.Simcenter.Flomaster.2019.3. part1.rar
https://nitroflare.com/view/88282F93B5F3961/pfbe6.Siemens.Simcenter.Flomaster.2019.3. part2.rar
https://nitroflare.com/view/2ED50FCE080F17C/pfbe6.Siemens.Simcenter.Flomaster.2019.3. part3.rar
https://nitroflare.com/view/818DC10DB8738E6/pfbe6.Siemens.Simcenter.Flomaster.2019.3. part4.rar
https://nitroflare.com/view/BF3D9D5D3A98E67/pfbe6.Siemens.Simcenter.Flomaster.2019.3. part5.rar

https://uploadgig.com/file/download/2Ec426300376Fd84/pfbe6.Siemens.Simcenter.Flomaste r.2019.3.part1.rar
https://uploadgig.com/file/download/901e65140ff1b4dF/pfbe6.Siemens.Simcenter.Flomaste r.2019.3.part2.rar
https://uploadgig.com/file/download/B0e8b9176710a5B2/pfbe6.Siemens.Simcenter.Flomaste r.2019.3.part3.rar
https://uploadgig.com/file/download/c7F7ab4e28b0010b/pfbe6.Siemens.Simcenter.Flom

Your reply
Bold Style  Italic Style  Underlined Style  Image Link  URL Link  Smilies  Disable BB codes *What's this?

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.
 

These forums are running on chat forum software miniBB™ © 2001-2020